Functional mesoporous poly(ionic liquid)-based copolymer monoliths: From synthesis to catalysis and microporous carbon production

Ionic liquid-functionalized mesoporous polymeric networks with specific surface area up to 935 m²/g have been successfully synthesized one pot by solvothermal copolymerization of divinylbenzene and monomeric ionic liquids. The as-obtained polymers exhibit a monolithic structure featuring large pore volumes, an abundant mesoporosity and an adjustable content of ionic liquids. The effect of the reaction conditions on the pore structure has been studied in detail. These poly(ionic liquid)-based porous networks (PILPNs) have then been employed as precursors in two distinct applications, namely organocatalysis and production of microporous carbon monoliths. Selected organocatalyzed reactions, including carbonatation of propylene oxide by cycloaddition with carbon dioxide, benzoin condensation, and cyanosilylation of benzaldehyde have been readily triggered by PILPNs acting as crosslinked polymer-supported (pre)catalysts. The two latter reactions required the prior deprotonation of the imidazolium salt units with a strong base to successfully generate polymer-supported N-heterocyclic carbenes, referred to as poly(NHC)s. Facile recycling and reuse of polymer-supported (pre)catalysts was achieved by simple filtration owing to the heterogeneous reaction conditions. Furthermore, PILPNs could be easily converted into microporous carbon monoliths via CO₂ activation.     

Low-bandgap copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges

Two donor–acceptor-type alternating copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges were synthesized by Suzuki cross-coupling polymerization, and their optical, electrochemical, and photovoltaic properties were compared. The selenophene π-bridged copolymer (PCz-DSeBSe) exhibited a smaller band-gap (1.82 eV) than the thiophene-bridged polymer (PCz-DTBSe; 1.89 eV). PCz-DSeBSe also showed a deeper highest occupied molecular orbital energy level (−5.36 eV) than PCz-DTBSe (−5.20 eV). Moreover, the PCz-DSeBSe thin film showed higher crystallinity and hole mobility than the PCz-DTBSe thin film. Organic photovoltaic devices were fabricated using the polymers as the donors and [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) as the acceptor. The device using PCz-DSeBSe showed a higher open circuit voltage (V_oc), short circuit current density (J_sc), and power conversion efficiency (PCE) than that using PCz-DTBSe. The fabricated indium tin oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/PCz-DSeBSe:PC₇₁BM/LiF/Al device showed the maximum PCE of 2.88% with a J_sc of 7.87 mA/cm², an V_oc of 0.80 V, and a fill factor of 0.50 under AM 1.5G irradiation (100 mW/cm²).     

Characterization of rheological and thermophysical properties of HDPE–wood composite

The objective of this study is to develop a new biocomposite material with high deformation ability. In this regard, the thermal, rheological, and thermophysical properties of this new composite were characterized as a function of temperature and filler concentration. High density polyethylene (HDPE) was the matrix of this new composite which was reinforced with six sawdust concentrations 0%, 20%, 30%, 40%, 50%, and 60%. Maleic anhydride grafted polyethylene (PE‐g‐MA) was used as coupling agent. Addition of sawdust with PE‐g‐MA increased significantly the complex viscosity, the storage modulus (G′), and loss modulus (G″) of the matrix. The superposition of the complex viscosity curves using temperature dependent shift factor, allowed the construction of a viscosity master curve covering a wide range of temperatures. Arrhenius law was used for the relationship of the shift factor to temperature. Furthermore, method of Van Gurp and Palmen (tan delta vs. G*) is also used to control the time–temperature superposition. The experimental results can be well fitted with the cross rheological model which allowed the prediction of the thermorheological properties of the composites over a broad frequency range. By increasing wood concentration, both the activation energy and relaxation time for the biocomposites determined using, respectively, the Arrhenius law and the cole–cole rule increased. By contrast, specific heat of the matrix decreased with sawdust addition while its dimensional stability improved. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40495.     

The phase structure,chain diffusion motion and local reorientation motion: C Solid-state NMR study on the highly-crystalline solid polymer electrolytes

In our previous paper, we investigated the influence of the phase structure on the polymeric chain diffusion in the complexed crystals of solid polymer electrolytes of PEO:LiAsF₆ and PEO:LiCF₃SO₃. We observed that with the increase of the crystallinity, the chain diffusion rate decreases dramatically. In this work, by employing the ¹³C CODEX NMR spectroscopy, we demonstrate that opposite to the behavior of the chain diffusion motion, the local reorientation motion of polymeric chains within the complexed crystals are greatly increased with the increase of the crystallinity, which is accompanied by the change of the phase structure. The relationship between the different molecular motions within the complexed crystals and the phase structure are discussed therefore.     

On-off switching properties of one-dimensional photonic crystals consisting of azo-functionalized polymer liquid crystals having different methylene spacers and polyvinyl alcohol

In this paper, photoresponsive behavior of multi-bilayered films having precisely controlled layer thickness prepared by stacking an azo-functionalized polymer liquid crystal, PMAzXAc, and polyvinyl alcohol alternatively, PVA, is described. The multi-bilayered films were found to reflect a light of specific wavelength depending on the layer thickness and refractive index, and showed the reversible change in the reflection intensity by irradiation with visible and UV lights. The change in the reflection intensity was brought about by change in the molecular orientation of PMAzXAc between an out-of-plane orientation and a photo-induced isotropic state, and was strongly dependent on the number of methylene spacer of PMAzXAc linking the azobenzene side group with the acrylate polymer main chain. PMAz6Ac with hexa-methylene spacer showed the largest change in the reflection intensity, while smaller change in the reflection intensity was observed for PMAzXAc having shorter or longer methylene spacer than 6. The effect of the methylene spacers on the photochemical change in the molecular orientation of azobenzene chromophores in the multi-bilayered films will be discussed.     

Nanostructured poly(3-hexylthiophene-2,5-diyl) films with tunable dimensions through self-assembly with polystyrene

Poly(3-hexylthiophene-2,5-diyl) is among the most widely used conjugated polymers for opto-electronic applications. To enhance its properties, researchers have attempted to nanostructure this polymer using various processes including breath figure arrays, nanolithography and elaborated organic synthesis. We here demonstrate a simple process to nanostructure the conjugated polymer using self-assembly with polystyrene and selective removal of one of the phases. The influence of the molecular weight of each polymer on the thin film morphology was systematically studied by atomic force microscopy. Using this approach, we observe two types of nanostructure, namely, nanoporous and nanoisland structures, of which the dimensions can be tuned by modifying the molecular weight of each polymer in the blend. This simple process introduces a cost-effective alternative to produce thin films of conjugated polymer with average nano-features from 100 nm up to 500 nm which could be used in a wide range of applications.     

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

Thermal rearrangement of polyimides with ortho-position groups to polybenzoxazoles and related structures has been of recent interest for producing gas separation membranes. This study explores the influence of synthesis route and ortho-position functional group on the thermal rearrangement process and the fractional free volume of thermally rearranged (TR) polymers produced from polyimides derived from 3,3′-dihydroxy-4,4′-diamino-biphenyl and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (HAB–6FDA). Acetate, propanoate, and pivalate ortho-position functional groups were considered. Thermogravimetric analysis (TGA) was used to study thermal rearrangement at temperatures between 350 and 450 °C, and evolved gases from TGA were analyzed via mass spectrometry to characterize the byproducts of thermal rearrangement and thermal degradation. CO₂ was the major byproduct of thermal rearrangement for all samples, and its evolution began well before the onset of thermal degradation. When non-hydroxyl ortho-position groups were present in the polymers, several byproducts other than CO₂ were also observed due to the loss of these ortho-position groups before thermal rearrangement. Free volume generally increased with increasing extent of thermal rearrangement, but precise values of free volume could not be accurately determined for polymers with propanoate and pivalate ortho-position functional groups due to uncertainties in the chemical structure of partially converted materials. For polymers with acetate and hydroxyl ortho-position groups, free volume could be determined within the uncertainty of density measurements. Thermal rearrangement behavior and free volume results for acetate containing polymers synthesized via different routes were very similar. Based on these results, the chemical structure of the ortho-position functional group has a larger impact on TR polymer properties than the polyimide precursor synthesis route.     

Carbon nanotube–polyaniline composites

The last decade has seen a growing interest in hybrid electrically conducting nanocomposites. This article aims to provide a detailed overview of the present status of research in carbon nanotube–polyaniline (CNT/PANI) composites, from processing to structural and property evaluations. CNT/PANI are synthesized by electrochemical and chemical processing. When chemical methods are used, the main challenge is to obtain processable CNT/PANI in the emeraldine salt (ES) form composites. Stable dispersions of ES–CNT in organic media are prepared using the post doping method, inverse emulsion polymerization, or ex situ polymerizations. On the contrary, stable water dispersions of CNT/ES are prepared using hydrophilization of a preformed CNT/ES composite, direct synthesis of micelle–CNT hybrid templates, interfacial polymerization, covalent functionalization of CNT with a water soluble polymer, or using electrostatic interactions between two oppositely charged ES and CNT aqueous colloids. Moreover, the strategies for the synthesis of ternary CNT/PANI composites incorporating noble metal nanoparticles, metal oxide, or graphene sheets are also presented and analyzed in depth. Finally, we give a review of potential applications, including chemical sensors, capacitors, fuel cells and electronic devices.     

Electroactive phases of poly(vinylidene fluoride): Determination,processing and applications

Poly(vinylidene fluoride), PVDF, and its copolymers are the family of polymers with the highest dielectric constant and electroactive response, including piezoelectric, pyroelectric and ferroelectric effects. The electroactive properties are increasingly important in a wide range of applications such as in biomedicine, energy generation and storage, monitoring and control, and include the development of sensors and actuators, separator and filtration membranes and smart scaffolds, among others. For many of these applications the polymer should be in one of its electroactive phases. This review presents the developments and summarizes the main characteristics of the electroactive phases of PVDF and copolymers, indicates the different processing strategies as well as the way in which the phase content is identified and quantified. Additionally, recent advances in the development of electroactive composites allowing novel effects, such as magnetoelectric responses, and opening new applications areas are presented. Finally, some of the more interesting potential applications and processing challenges are discussed.     

New printing inks with barrier performance for packaging applications: Design and investigation

Barrier properties of packaging materials against moisture and oxygen penetration are of high relevance. Enhanced protection of existing materials against weather conditions can be achieved by application of printed coatings. To improve barrier performance of packaging materials, new inks for obtaining printed coatings with a layered structure were developed and investigated. The proposed ink compositions for flexographic printing on paper substrates are based on an environmentally friendly acrylic binder and contain inorganic fillers with platelet particles incorporated in the polymer matrix. Coatings based on the developed printing inks demonstrate significantly decreased water vapour permeability compared to traditional polymer inks. The effect of decreased permeability was investigated considering inks rheological behaviour, the coating structure, mechanical properties, surface energy and water uptake for different ink formulations. The developed inks provide variable optical properties including coatings with a relatively high transparency. The development of the functional barrier inks contributes to saving natural resources by prolonging life performance of packaging materials and goods.